SBB unstirred thermostatic water baths from Grant are suitable for a variety of basic heating tasks.
Model SBB12 features:
- For boiling at 100°C
- Analogue energy regulator maintains boiling without violent agitation or excessive steam
- Adjustable dial setting and two fixed overtemperature cut-outs
- Supplied with clear polycarbonate lid and constant level device
With stainless steel tank in outer case of zinc-treated steel. The heater is located inside the stainless steel tank and covered by a stainless steel, perforated shelf. For 230V 50Hz single phase supplies, 1.5kW. Note: these baths must be used with a lid or a layer of polypropylene spheres.
Dimensions and accessory information:
| Grant Model | Tank, litres | Internal dimensions L x W x D, mm | Rack series and number accepted | Lids accepted |
| PB1 | 3.5 | 225 x 120 x 80 | 3 x P1 | LP1 |
| SAP2 | 2 | 125 x 140 x 115 | - | AQL2 |
| SAP2S (low-form) | 2 | 145 x 290 x 30 | - | AQL5, LU6 |
| JBA5, JBN5, SAP5, SBB5 | 5 | 145 x 290 x 115 | 1 x J2 | AQL5, LU6 |
| JBA12, JBN12, SAP12, SBB12 | 12 | 315 x 290 x 115 | 2 x J2 | AQL12, LU14 |
| JBA18, JBN18, SAP18, SBB18 | 18 | 495 x 290 x 115 | 3 x J2 | AQL26, LU28 |
| JBA26, JBN26, SAP26, SBB26 | 26 | 495 x 290 x 165 | 4 x J2 | AQL26, LU28 |
| SAP34 | 34 | 630 x 290 x 160 | 6 x J2 | LU36 |
| SAP Dual (for two-temperature procedures) | 5 and 12 | 145 x 290 x 115 and 315 x 290 x 115 | 1 x J2 and 2 x J2 | AQL5, LU6 and AQL12, LU14 |